RSM-AG650TIP
Introduction
RSM-AG nano coating spraying series equipment is a coating spraying process specially formulated to meet the needs of anti-glare. Taking into account the insufficient production capacity of a simplex machine, a duplex machine was designed, and its output is twice that of a duplex machine. , the machine can produce 1tray every 140sec.
Device Features
- 1. The two stations work together, or one station can be selected to work independently.
- 2. Increase production capacity, the production capacity of double station is 2 times that of single station.
- 3. The injection valve is not easy to be blocked during continuous production.
- 4. Expert in spraying AS/AF/AG/AR, PEDOT potion.
- 5. If there is any fault on one side, the other side can work.
Spesifications
- 1. The glass has no flash point and no bright spot after spraying.
- 2. The hardness effect is the best in the industry, and the RA value is the lowest in the industry.
- 3. The yield rate measured by the industry can reach more than 90%.
- 4. Potion supplier certified and designated as recommended spray equipment.
- 5. It has successively obtained customer certification for mass production introduction.
Simplex vs Duplex Specifications
Item |
Function |
Simplex Specification |
Duplex Specification |
Basic Specs |
Main Appearance |
width to 3210mm × depth 1350mm × height 2281mm |
width 4700mm × depth 2100mm × height 2281mm |
In/Out |
Manual feeding/automatic feeding |
Auto feed upstream/Auto feed downstream |
|
Common Power Source |
AIR type |
6 kg/cm2, 40 L/min M/C Size 12mm x2 sets |
80 psi dry unlubricated air, 6 kg/cm2, 40 L/min × 2 + 50 L/min × 4 |
Performance style |
Variety or product switching time |
The switching time of varieties must be less than 15 minutes |
Variety switching time must be less than 10 minutes |
Tact time |
Based on the product with an effective area of ??600*500mm heating table, the machine can output 1 tray every 240-360sec (depending on the setting temperature of spraying) excluding manual feeding time | Based on the product with an effective area of ??600x500mm for the heating table of the dual workstations, the machine should output 1 tray every 140sec (to change the parameters used in the production of the AG machine), and the time must be continuous feeding, excluding the delay time of feeding | |
Departments |
L/Unload |
Method: Send and receive by the operator |
Feeding: automatic feeding |
Accessory |
Job Tray |
30 set/set |
60 set/set |
Related Applications
Mobile phone/tablet/laptop/LCD/vehicle panel, building wall glass, whiteboard glass, explosion-proof glass, etc.
